The natural sand shaving lacquer of Li Shu Yuan is the main material with spherical natural color sand and func-tional filler. It has the characteristics of high hardness, good water resistance, good weatherability and excellent color retention.
It is widely applied to the decoration effect of buildings and walls.
Color: according to the color configuration of the color sand, it can be made according to the actual stone sam-ples.
Theoretical dosage: 2~3kg/m2 (depending on actual col-or).
Repainting time: at least 24 hours per time (25 C, the lo-wer the temperature, the longer the interval).
Construction conditions: the suitable construction temperature is 5 C -35 C (preferably above 10 C) and the relative humidity is below 85%(The temperature is less than 5 degrees, higher than 40 degrees, the temperature is more than 80 %, construction is not recommended, and construction can not be carried out on rainy days.).
The overall sensory effect is good, nontoxic and tasteless.
The decorative surface has a strong sense of tex-ture, and the decorative pattern is rich and colorful.
High weatherproof and excellent color retention.
Excellent performance of lacquer film with excell-ent scratch resistance.
Before painting the primer, check the moisture content and pH value of the bottom putty, moisture content is less than 10%, pH is less than 10.
The matching primer must be evenly brushed and completely closed the base. It is suggested that the primer should not be directly adjusted to black, instead of painting line paint.
Before use, mix well, if water is diluted in special circumstances, the amount of water should be controlled within 5%, and the whole batch of water should be kept consistent.
After each batch of products arrive at the site, it is necessary to test the sample and confirm the color. Please use the same batch of products on the same wall to prevent the color difference, and keep the air pressure, construction technique, and the thickness of the construction on the same wall to prevent the defects, such as cracking, bottom, color difference, and flower.
When scraping, the joint position should be left at the line junction, and maintain the same technique and the same environment, if scraping in the pulp collection keep up and down.
The construction should avoid heavy rain and snow weather.