It is mainly composed of high efficiency alkali resistant additives and polymer emulsion. In this way, the primer has a composite mesh material, at the same time, the primer has a very strong alkali resistance, waterproof ability, and at the same time has a very strong adhesion.
It is suitable for decoration and energy conservation of all kinds of new and old walls.
Construction methods: brush, roll or spray, add diluted water in proportion, and mix well before construction.
Construction ratio: brush, roller 5-15% (volume ratio), spraying 0-15% (volume ratio) difference. The dilution ratio varies depending on the construction method and surface roughness.
Theoretical amount of paint: dry film thickness of 30 microns, the actual brushing area will vary according to the construction method, surface roughness and construction environment.
Repainting time: minimum interval of 4 hours (tempera-ture 25 C / relative humidity less than 85%).
It is used to improve the adhesion of topcoat, incr-ease the fullness of topcoat, provide anti-alkaline, provide anti-corrosion function, and ensure the uniform absorption of topcoat.
Closed: some walls are alkaline, after soaking in moisture, water and other alkaline flowers, the name of "Pan alkali", which causes the surface of the film to form a volcano shaped protuberance, seriously on the surface of the film formation of a layer of alkali frost, eventually making the film damage. Heat pre-servation special alkali resistant primer can seal off the effect and alleviate the situation.
Adhesion: the content of emulsion in primer is high and the adhesion is strong. It can improve the adhesion between outer coating film and wall surface.
Temperature change: it will not affect the perfor-mance of primer paint film without external tempe-rature.
Read instructions before use to obtain reliable and satisfactory coating effect.
It must be stored in a cool and dry place, to prevent frosts (not less than 0 degrees Celsius), and the shelf life is 12 months.
This product should not be used in combination with other brands of paint.
The face mask should be worn during construction. If the eyes are stained, rinse with clean water in time.
After the construction of the anti cracking layer, tap water cleaning tools should be used immediately. The rear lid can be tightly sealed and kept to prevent dust and dirt from coating.