On the basis of the preparation process of the existing pure color reflection and heat insulation coating, the conventional water-based colourful coating is improved. In view of the influence of many factors such as bottom coating, color point and pigment on the performance of the coating, the reflective titanium white and hollow glass microsphere system are used as the bottom layer, and the inorganic mixed phase pigment and the radiant powder system are used as the double layer. Fire insulation coating structure. With high reflection effect, the coating layer system can get better stain resistance performance. It solves the single hue, poor stain resistance of the reflective insulation coating, the rapid decline of reflection performance after pollution, and further provides space for the function and expansion of the water-based colourful coatings. pollution, and it is also a water-based colourful coating. It provides space for functional and extended use.
It is suitable for decoration and energy conservation of all kinds of new and old walls.
Drying time: drying time (25 C) humidity < 85%: surface drying 3 hours, dry 24 hours (if the temperature is low, need to extend the drying time)
Theoretical dosage: theoretical spray area 0.25-0.4kg/m2(Based on actual spraying effect)
Recoating time: the recoating time is 24 hours.
Excellent reflective heat insulation performance
Excellent water resistance, alkali resistance, stain resistance, bonding strength and weatherability.
Excellent anti algal and anti algal function.
Read instructions before use to obtain reliable and satisfactory coating effect.
It must be stored in a cool and dry place, to prevent frosts (not less than 0 degrees Celsius), and the shelf life is 12 months.
This product should not be used in combination with other brands of paint.
The face mask should be worn during construction. If the eyes are stained, rinse with clean water in time.
After the construction of the anti cracking layer, tap water cleaning tools should be used immediately. The rear lid can be tightly sealed and kept to prevent dust and dirt from coating.