The product is based on high calcium ore powder, combined with kaolin, fine talc powder, light heat preservation and sound insulation particles, organic adhesives, and organic thixotropic materials. The composition of each raw material strictly eliminates harmful substances such as formaldehyde and VOC, and truly achieves environmental protection, non-toxic, non-polluting and non-volatile substances. It also achieves unparalleled coating and leveling functions through thixotropic materials and particle size control.
Super bonding force.
Air raid drum.
Batch scraping does not blistereasily
There is no solid, no floatation and dirt at the grassroots level. The base of the powdered skin should be clear and clean(if the original wall base has approved the building glue putty layer, gypsum powder, and paper gluten lime, all must be eradicated) and coated with paint.
Wall holes and wall drums should be treated flat, repair seams and wall cracks should be affixed bandages.
Calcium silicate board, gypsum board, template and wall or board and board seams should be filled first(using the matching special seam product).
Add water and stir, according to putty powder: water = 10:3.5-4 ratio, add water to fully stir into a uniform paste, leave for 10 minutes, and use the first two to stir evenly.
Scratching and polishing: Scratching in batches, the thickness of each batch is not more than 10mm, and the thickness of the total batch scraping should not exceed 30mm. The cargo has been carried out after the layer of putty that has been scraped by the batch before the batch scraping should be dried. The strength of this product is high and it is difficult to polish. It is only suitable for base leveling and should not be used for the last batch scraping.